i am selling my turbo hotside, it consists of a hugger style header on the driver side with a vband clamp it connects to a 2.5"crossover and flex pipe then comes up by the starter into the passenger side turbo manifold, then the 2.5" pipe goes past the cylinder hed and goes into a t4 flange on an angle.
Hugger header is stainless steel but the rest is mild steel, i fabricated it all and everything was welded with a mig. ive had this setup since 2010 with many different turbos, mpt70,tc78,pt88 and this setup would spool them up nicely, downpipe is a 3.5" with a 3" vband flange on the turbo side and a o2 bung before it turns down. I had this on my built 383 with great succes, runners are 1 5/8"
Looking to get 450 for the hotside except the wastegate flange
i also have a csu blow thru carb 750cfm that id like to get 700 for it is in great condition and ill even throw in a holley jet kit 64-99
and last is a mallory 4309 boost referenced regulator that i will sell for 70