Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - . 028 gasket
Thread: . 028 gasket
View Single Post
  #1 (permalink)  
Old 06-29-2008, 08:39 PM
price price is offline
Registered User
 
Last photo:
Join Date: May 2006
Location: Kamloops B.C.
Posts: 231
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
. 028 gasket

I am cleaning up an old 4 bolt 350 Chev. I put in a 2102 cam (Edelbrock) and lifters. I am running this engine in an 1989 Chev. 1/2 ton. I bought and installed a Mr Gasket gasket kit and now after reading a whack of info on quench ,I have ordered up .028 head gaskets to reduce the quench. I will get serious this time with the heads off to determine the deck height and the ccs of the 882 heads . From what I measured before, I was at .020 in the hole. These are high compression forged pistons . Not doing my home work has caused me to think (NOT KNOW) that the head gasket is.040 Am I correct in thinking that .060 is too much quench.
Reply With Quote