Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - 1.5 vs 1.6 on a 406
View Single Post
  #1 (permalink)  
Old 04-21-2008, 02:30 PM
sunman sunman is offline
Registered User
Join Date: Aug 2007
Location: Live Oak Fla.
Posts: 11
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
1.5 vs 1.6 on a 406

what do U builders think about intake & exhaust ratios?
stay w/1.5's on all 16 or mix'em up w/1.5's Int/1.6 exh. or 1.6's on 16 valves
have a 263 int/273 exh @.50 cam w/13.8:1 c/r 406sbc. TunnelRam in a flat bottom boat, got 1.6 on the heads now, but the builder didnt do a good job of ck'n the 1.60 springs vs. the underside of the rocker, alum in the filter so I'm gonna get the correct rockers for the springs, so nows the time to decide on ratios and what about useing the old push rods 8.100 on 1.5's? its a no-no
Reply With Quote