Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - 14101083 Cylinder Head
View Single Post
  #30 (permalink)  
Old 01-06-2013, 06:02 AM
Camaro_Nut2001's Avatar
Camaro_Nut2001 Camaro_Nut2001 is offline
Drag Racing Lover
 

Last journal entry: '68 Impala Project
Last photo:
Join Date: May 2009
Location: Mascot, TN.
Age: 46
Posts: 143
Wiki Edits: 0

Thanks: 86
Thanked 2 Times in 2 Posts
Quote:
Originally Posted by ChevroletSS View Post
Ill port them myself. Now I have practiced porting on heads for endless hours but what I still dont get is how Im supposed to tell if I made all the runners the same. I mean its very possible that by doing it myself that when Im done none of them will be the same. Does it matter if one flows just a little differently than others and so on?????
I am just learning the porting process and have practiced some on a set of crappy "882" heads and am now porting my "062" Vortecs. Let me tell ya, this is a learning experience to say the least lol. It was brought to my attention that my ports were not the same from the pictures I had posted. I went back and got them as close to the same, at least to my eyes, as I could. The only advice I can give you is take your time, check your work often, try to imagine the air coming in and going out and focus on that area and the most important is, enjoy yourself. Hot Roddin is what I trully love and cherish every second that I am in the garage. Don't get me wrong, lol, as I am nervous about ruining a good pair of heads and/or making them worse but, thats what learning is all about. Also, I value the knowledge of alot of our members and read, have read and will read alot more on heads in every aspect. Good luck to you and I am quite sure you will do a fine job on your porting.
Reply With Quote