Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - 1937 chevy coupe rear brake drums
View Single Post
  #1 (permalink)  
Old 05-04-2010, 11:29 AM
a70dart's Avatar
a70dart a70dart is offline
Registered User
 
Last photo:
Join Date: May 2010
Location: Texas
Posts: 25
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
1937 chevy coupe rear brake drums

I purchased a vehicle that was about 95% completed before owner passed away.
Previous owner had all brake parts, so I installed all the new parts and appears that the used brake drums are too narrow. Loks like the brake shoes and wheel cylinders are rubbing once lugnuts are tightened.
I measured it and appears the brake drum should be 3/8 to 7/16 wider to miss these parts. It does look like he has the correct shoes and wheel cylinders. I have looked online and some show drums without indentions and some show with.
I thought there may be someone that has run into this problem and can shed some light before spending $$$$ on new drums that may not work.

Thanks
Reply With Quote