Hot Rod Forum banner

1940 Chevy engine swap

4K views 1 reply 2 participants last post by  techinspector1 
#1 ·
I have an original 40 Chev 216. I woul like to swap that engine out, replace with something that would bolt right up to my original 3 spd man tran. Any suggestions?
 
#2 ·
drvaught said:
I have an original 40 Chev 216. I woul like to swap that engine out, replace with something that would bolt right up to my original 3 spd man tran. Any suggestions?
Go here....
http://www.inliners.org/
On the left side of the page, click on Tech Tips....
On Tech Tips, click on Engine Swaps...
There, you will find an article titled Swapping Stovebolts...happy reading.:thumbup:
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top