[40FLIER]

The hole at the bottom of the windshield divider, will the one available for the 40-up pick up work?

[trees]

My first reaction is "Yes, it will", but if it is offered in a catalog for a 40 Ford Pickup and does not include the cars as well, it probably will not. Look in a Denic Carpenter or Bob Drake or Mac's catalog under 40 Ford cars and see if the part offered includes the Pickup. If you don't have a catalog, then go to bobdrake.com or denniscarpenter.com or mac's.com and look it up in their online catalog.

Trees

[35terraplane]

Originally Posted by trees

My first reaction is "Yes, it will", but if it is offered in a catalog for a 40 Ford Pickup and does not include the cars as well, it probably will not. Look in a Denic Carpenter or Bob Drake or Mac's catalog under 40 Ford cars and see if the part offered includes the Pickup. If you don't have a catalog, then go to bobdrake.com or denniscarpenter.com or mac's.com and look it up in their online catalog.

Trees

All the garnish molding from a 40 Ford, are the same though the 47 Ford pickup

Bob

[alittle1]

Perhaps you overcomplicated the subject, are we talking about the w/s switch or are we talking about the w/s wiper shaft hole at the base of the windshield?

The wiper shaft is the same, car or pickup.

http://www.grumps-garage.com/2848F-C11.html

[trees]

I looked it up in MACS. The reproduction kit they offer is the same for the passenger car and the 40-47 pickup.

Trees

[35terraplane]

Originally Posted by trees

I looked it up in MACS. The reproduction kit they offer is the same for the passenger car and the 40-47 pickup.

Trees

Thanks Trees, Even I surprise myself sometimes. mine was a kind of guess.

Bob