Hot Rod Forum : Hotrodders Bulletin Board

Hot Rod Forum : Hotrodders Bulletin Board (http://www.hotrodders.com/forum/)
-   Suspension - Brakes - Steering (http://www.hotrodders.com/forum/suspension-brakes-steering/)
-   -   1946 Ford truck spindles interchange?... (http://www.hotrodders.com/forum/1946-ford-truck-spindles-interchange-99165.html)

Jimmy Geske 09-28-2006 05:42 AM

1946 Ford truck spindles interchange?...
 
Can anyone tell me if the 1946 ford truck spindles will interchange with the 37-48 ford car spindles? Thanks for any and all info!

Deuce 09-28-2006 07:53 AM

:welcome: WELCOME to Hotrodders.com :welcome:

What size Ford truck are we talking about ??
Ford made a lot of different load rated trucks in 1946 ... pickups, 3/4 ton and larger ...

Again WELCOME ... :D

Deuce ... Moderator

Jimmy Geske 09-28-2006 08:44 AM

Thanks for the reply Deuce!
I believe the truck to be an actual pickup size as it seems very small. The bolt pattern is the 5x5.5 size. Thanks again for the help!

home brew 10-01-2006 11:09 PM

I am not absolutely sure of this but if you have a pickup then I think they are all the same spindles. At least I have never seen a separate listing for pickup and car spindles. Knowing about Henry Ford I don't think he would have used different ones if he could get away with it.

TooMany2count 10-01-2006 11:42 PM

the car spindle u mentioned will fit up & the kings pins are the same.....joe

Jimmy Geske 10-02-2006 04:49 AM

Thats what I was hoping to hear! Thanks very much for the replies fellas!


All times are GMT -6. The time now is 03:55 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.