1950 chevy frame swap
I have a 1950 chevy truck (3100, five window) with a broken/ repaired frame. It was a farm truck so it's a little rough. The body is in good shape but the frame is done. I've heared about the an S-10 frame swap and would appreciate any advise or recomendations.
There was another thread a couple of weeks ago on the same subject. I can't recall the title of the thread right now, but this was the link that I supplied to that one also. It deals with putting a '52 Suburban body onto a s-10 frame. Check it out, it might help you get some ideas brewing.
<a href="http://www.commerce.usask.ca/staff/hipkin/burb/frameswap.html" target="_blank">http://www.commerce.usask.ca/staff/hipkin/burb/frameswap.html</a>
[ December 23, 2002: Message edited by: crshrmn3 ]</p>
[ December 23, 2002: Message edited by: Maverick ]</p>
|All times are GMT -6. The time now is 02:40 AM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.