[J R Barning]

I ttried to fill this out the other day but lost it. I'm a 70 yeaar old hot rodder in a wheelchair. I had polio at 14 yrs in 1949, and got into hotrodding about 2 yrs later. I've been at it since.I recently sold my 1940 2 dr Deluxe with a crate 350 w 350 tran vintage air, etc. I had the drivers bucket with a tube in tube setup on the back of my bucket and tube in tube under the seats. it raised up, turned 90 degrees, pushed out past the running board,and dropped down 14 inches so I could transfer to/from my wheelchair. I've lost strength in my arms and am now trying to upfit a 1954 panel with a chair lift to drive from my wheelchair Recent cars have been a stock '40 deluxe 2 dr., a '50 merc coupe with flathead with offenhauser heads /dual 94's, louvered hood etc, 56k miles, 3- '53 ford victorias, a'53 Olds 88 hardtop, and my latest 40 deluxe. I just purchased a real nice 54 ford panel and need held locating the vin number location on the frame. I would appreciate any help I can get.
Thanks, Jerry Barning

[jesse01]

Originally Posted by J R Barning

I ttried to fill this out the other day but lost it. I'm a 70 yeaar old hot rodder in a wheelchair.

now thats dedication only if half as many people were as dedicated as you

welcome to hotrodders and good luck w/ your projects

J