Originally Posted by tyvanwie
Hello everyone, new member here!
My dad just recently purchased a 1956ish airplane tug for $500 because it had the 331 hemi it. Once we started ripping apart the body however, we found out it was an industrial engine. So naturally, we are wondering what, if any, differences there are between the industrial and the normal 331. Also what vehicles this engine would be a good use for. Basically it was a spur of the moment kind of thing and now we are at a loss as to what to do, haha.
Any help is much appreciated
Go to Hot Heads Research and Racing ,they have about anything you will need to know or buy ,I purchaced a USED 2x4 intake for my 352 Desoto hemi.as they are different from Dodge Or Chysler some parts are interchangeable but not all.be sure to specify Chrysler when ordering parts...Hope this helps.