Hot Rod Forum : Hotrodders Bulletin Board

Hot Rod Forum : Hotrodders Bulletin Board (http://www.hotrodders.com/forum/)
-   Electrical (http://www.hotrodders.com/forum/electrical/)
-   -   1964 Chevy II wagon wire code problems (http://www.hotrodders.com/forum/1964-chevy-ii-wagon-wire-code-problems-234128.html)

roxnix64sbc 06-19-2013 04:25 PM

1964 Chevy II wagon wire code problems
 
I am finishing up a 64 wagon with blown SBC, but ran into 50 years of previous owners wire "upgrades".

PROBLEM:
I have a new directional (turn) signal switch with 7 wires...
1 purple
1 white
1 yellow
1 black
1 dark blue
1 light blue
1 green

these go on the dash harness which has the following 8 wires
1 pink
1 yellow
1 tan
1 red
2 dark blue
2 light blue

I know some of the matches, but can't figure out completely.
Any advise out there? Thanks, Ron

EOD Guy 06-19-2013 06:33 PM

4 Attachment(s)
These may help

vicrod 06-19-2013 08:56 PM

2 Attachment(s)
Was the car wired for turn signals and now you are replacing the TS switch? Or what?
Your PROBLEM list of wires are standard GM colors (the black wire should be brown) for TS. The car should have these same colors.
See attached schematic for each wire function.

vicrod

V8Square 07-10-2013 09:24 AM

Thanks
 
Quote:

Originally Posted by EOD Guy (Post 1686684)
These may help

These might be just what I am looking for. My project is a tube chassised, 1969VW Squareback station wagon. It has a sbc 350/330 horse, 700R4 trans, narrowed 9" Ford triangulated 4-bar If I could just figure out how to print each diagram, that would be great

EOD Guy 07-10-2013 09:57 PM

You should be able to bring them full screen then print as normal


All times are GMT -6. The time now is 04:56 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.