|
|
|
02-23-2003, 04:54 PM
|
||||
|
||||
1970 C/10 TRUCK
i HAVE A 70 TRUCK AND IT CAME FACTORY WITH v6 i PUT A 350 IN IT BUT ANY WAY The REAR END HAS NOT BEEN CHANGEd ARE v6 REAR 12 BOLT I was told they were not AND CAN YOU RUN 350 WITH v6 REAR OR ARE THEY DIFFERENT THAT CHEVY 12BOLT are there any different I jack it up and turnes the tire 2 times and drive turned 3and 1/2 times are they 3.55 and are they different than chevy 12 bolt rear ends
|
|
02-23-2003, 07:38 PM
|
||||||
|
||||||
|
What`s with the Cap lock? You sort of answered your own question 70 Nova. You say you have allready made your swap, and i take it it works? Think about it for a minute. We know from reading posts on here that guys run rear ends with all kinda of gear ratio`s. I run 3:08 in my truck, some run 3:73, 3:55`s, 4:11`s etc. So if you got it bolted up and it go`s down the street , and you like it. what is the question? Is it the reliability you are concerned about?
Slider in Wa.
|
|
02-24-2003, 04:44 PM
|
||||
|
||||
|
I just want to know if a V6 and V8 rear are different. Are there V6 gears and V8 gears or all the same Sorry For Posting Want post Again!!!!!
|
|
02-24-2003, 05:08 PM
|
||||||
|
||||||
|
Sorry to hear you won`t be posting here anymore that was not my intention at all. As far as i know you are as welcome here as the next guy.
Slider in Wa.
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
