Originally Posted by roadman65
Trying to figure where a two male prong red connector attaches in firewall. The other end goes in the four pin connector on the transmission I just had rebuilt. I cant figure for the life of me figure where this goes or what wires feed it. I suspected it wasn't going into lockup and traced the wires and found the connector hidden - not connected. I don't want to damage trans driving without lockup and it was rebuilt for stock tcc lockup. I tried to download pictures for past hour and just can't get my camera to cooperate. I would appreciate any input.
If you have a TH350C, the tranny won't be immediately (possibly never) damaged by not having the TC locked up, providing you have a tranny cooler.
Do you have a computer, or is this pre-computer ('80-back if GM)?
Details of what you have are needed.