1990 s10 700r4 bolts
I recently bought a 90' s10 tahoe great condition has the 4.3l v6 4x2. The tranny was rebuilt and is a 700r4, the guy didnt include any of the bolts except for one because a piece of the bell housing was broke off im gonna go ahead and put it in until I get a new transmission. I got a ton of bolts to test if they would fit and non do, I asked the man if he could find them he said he didn't so i have to buy some idunno if the pictures are posted or not this is my first time on this site but could people please help me figure out what all bolts/ and if nuts I need to buy that'll hold all the pieces on because I need some help with it. I did measure the one bolt and it was 1 1/2 long and bout a quarter thick
Best advice, go to a pick-a-part with your tools, remove the bolts you need, pay for 'em on the way out.
They are probably metric.
Probably one of these thread pitches:
M8 x 1.25
M8 x 1
M10 x 1.5
M10 x 1.25
I keep some at the shop here bagged and tagged so I can check stuff that comes in and I can order the correct bolts.
|All times are GMT -6. The time now is 11:39 AM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.