|
|
|
04-01-2012, 10:28 AM
|
||||
|
||||
|
283 Chevy 1964
In The Back Of The Block By The Distributer There Is A Hole That I Believe Is For A Pcv Valve That Goes Into A Can Thats Mounted Under The Intake Manifold . Im Assuming A Hose Attach's To It But Don't Know Where It Goes From There And Does Anyone Know Where I Can Purchase One Of These Pcv Valves.
I Am Wondering If I Should Block It Off And Do Away With It Thanks Richie 
|
|
04-01-2012, 10:55 AM
|
||||||
|
||||||
|
Prior to any special smog equipment Chevy'y used what was refered to as a road vent tube which basically vented the crankcase fumes out of that hole and down a tube under the car. Most guys just use the proper size freeze plug and be done with it and install a normal PVC system..
You can however use that hole for a straight up PCV but you will have to find the right size push in gromet and then you can run 2 breathers off of your valve covers. Makes it clean looking also.
|
|
04-09-2012, 04:12 PM
|
||||
|
||||
|
pvc
Thanks...I appreciate that
|
|
04-09-2012, 06:06 PM
|
||||||
|
||||||
|
1 1/4 " freeze plug...But then you should run a PCV valve through the valve covers...
Reid Last edited by vncruiser; 04-09-2012 at 06:07 PM. Reason: add on
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 1964 chevy c10 please help | ninmmkmfdm | Suspension - Brakes - Steering | 1 | 05-30-2011 05:24 AM |
| 1964 chevy k10 | redneck1964k10 | Hotrodding Basics | 8 | 06-17-2010 09:51 PM |
| 1964 Chevy Pickup | wiliweld | Introduce Yourself | 1 | 07-28-2009 09:16 PM |
| What Trannys Fit 1964 Chevy c10? | 64chevybeater | Transmission - Rearend | 4 | 06-13-2009 03:40 PM |
| 1964 chevy truck | Brian Makray | Introduce Yourself | 1 | 06-24-2006 12:39 AM |
