Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - 30 coupe ft floor
View Single Post
  #1 (permalink)  
Old 04-19-2009, 11:43 PM
william r plise's Avatar
william r plise william r plise is offline
Registered User

Last journal entry: 30 coupe pics.
Last photo:
Join Date: Mar 2006
Location: nevada
Posts: 65
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
30 coupe ft floor

Has anyone used the front floor from Speedway's for the recessed firewall on a 30/31 coupe. My coupe is sitting on So-Cal's pinched nose highboy frame and I installed their 4" recessed firewall and I need to install the front floor. The picture shows the floor flat with a bolt on hump for the tranny and two sides but my 350 is sitting above the floor height all the way back to the rear flange. Which means I will have to fabricate a tunnel for the center of the floor. Does anyone have journal pictures of a fabricated front floor. I want to use 16 gauge steel cuz I don't want to use wood but am not sure where to begain. Pops
Reply With Quote