[Trickerlog]

Hey ,


I want to build a 32' Ford Roadster Pedal car for my son .

Do anybody know were to get drawings with measurments? I want to build a 1/4 scale Model.

I found already drawings with measurements of the chassis but not for the body.

Thanks and Greetings from Hamburg

[timothale]

You might have to draw a grid pattern and scale yours. Some of the Students in the UVU street rod program have designed and built their own pedal car bodies. I was looking for the picts, but this is my wife's computer with about 3000 picts to search through. she has been organizing hers. some day i need to sort mine.

[327NUT]

Go to ebay and type in "32 Ford pedal car" lots of them, you might get some ideas

[Trickerlog]

Thanks for your answers , but I am looking for a scale drawing.

At UVU street rod program internet page I didn't find any pictures or scale drawings.

Chassis drawings with measurements I find a lot in www, but not for the Body .

[V8Square]

Originally Posted by Trickerlog

Thanks for your answers , but I am looking for a scale drawing.

At UVU street rod program internet page I didn't find any pictures or scale drawings.

Chassis drawings with measurements I find a lot in www, but not for the Body .

Guten tag. Fid a full size drawing and scale it down to 25%

[timothale]

----------------------------------------------------------------------------Here's from a post I did yesterday ----
Deuce Daddy Don info for 32 ford roadsters
His ad on the hamb says the body prints are 36 x 89 inches frame prints smaller size $ 71 for both sets. Have you looked at Chris Davenport aluminum 40 willys posts He built everything from scratch. also Jeff lilly site has a lot of good info on his site..............

Most of the projects at UVU are real cars. there were a few pedal cars at the Salt Lake Autorama this spring. Most of the pict's on the UVU site are older file picts most of the pedal cars were sketced, paper paterns drawn then off to the power hammer and pulmax.

[gough_m]

Originally Posted by Trickerlog

Hey ,


I want to build a 32' Ford Roadster Pedal car for my son .

Do anybody know were to get drawings with measurments? I want to build a 1/4 scale Model.

I found already drawings with measurements of the chassis but not for the body.

Thanks and Greetings from Hamburg

I have looked everywhere for a set of drawings for a chassis, would you be willing to share?

I was going to buy a kit but having two sons to build for it would cost me a fortune.

I think all I need is a push in the right direction as every time I put pen to paper it gets more and more intwined, to the point last week where the tot rods were going to have indepndant susspension and a tow bar fitted.

The problem I am having is not knowing the any sizes when i messure out the floor pan its not much smaller then my ford foucus!!

Any help would be apreciated!!!!

[Trickerlog]

Sure here are the links :

http://www.wescottsauto.com/Tech/frame_specs.html

http://www.motormayhem.net/mode-a-ford-refrence-sheet/

Yesterday I bought a Revell 85-2620 (Ford 1932 modell) in the states and I will get the package in a few weeks , I take the dimentions I need from the scale modell

Hope the links will help you!