Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - 327 power questions
View Single Post
  #7 (permalink)  
Old 09-01-2012, 02:11 PM
cdminter59 cdminter59 is offline
Registered User
 
Last photo:
Join Date: Jan 2011
Location: Hopewell, Va
Age: 62
Posts: 1,228
Wiki Edits: 0

Thanks: 0
Thanked 121 Times in 117 Posts
327 power questions

What type of cam are you considering Hydraulic, solid lifter, hydraulic roller, or mechanical roller? Is this going to be a street driven truck or race track? I will tell you now that a hydraulic or mechanical roller is big bucks. You have to buy a kit with any camshaft which consist of cam, lifters, valve springs, retainers,and locks. For the street cam 12-239-3 X4262H, 1300-5600 operating range, .462/.480 lift and 218*/226* duration, 2500-3000 stall converter, 385 hp@ 5500 rpms, Torque 409 @ 4000 rpms. 12-242-2 XE268H, 1600-5800 operating range, .447/.480 lift and 224/230 duration, 2500-3000 stall converter, 396 hp @ 6000 rpms, Torque 401 @ 4000 rpms. Edelbrock Performer Rpm Intake, Holley or Demon 750 CFM carburetor.
Reply With Quote