Hot Rod Forum banner

327 for s-10

872 views 1 reply 2 participants last post by  lluciano77 
#1 ·
Hi guys,new here.Current project building a 327(350 block +.030,307 crank )for s-10 4x4.Wanted to see what you guys think of my combination,or if you have any suggestions.

Edlebrock carb 600 cfm
Edlebrock performer intake
comp cams 268h
kb+100 dome pistons 76 cc heads
comp cams roller tip rockers

This should give me about 9-1 compression ratio,right??Low enough for regular pump gas,as it will be a daily driver.
What do you think?? Thanks
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top