331 Cadillac part
I currently have a 1953 Cadillac 331 in the shop I'm building for a customer. I'm trying to find a source for the rear oil expansion plug. Not the 9/16 one in the block but the 1.135 one in the bellhousing. The kit that I completed the rest of the block with did not contain this one.
I've contacted both Kanter and Egge and neither one carry it. Anyone out there have a source? These are the disc type plugs not the later cup style plugs.
If not I'll have to make one from a larger size but I'd like to avoid going that route.
I should have held off on making this post.
I contacted Dorman directly and found some. :)
|All times are GMT -6. The time now is 03:35 AM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.