Hot Rod Forum : Hotrodders Bulletin Board

Hot Rod Forum : Hotrodders Bulletin Board (
-   Hotrodding Basics (
-   -   350 build advice (

75chev4x4 01-17-2011 10:03 AM

350 build advice
Wanting to build my first sbc for my 75 k20. Would like to copy the goodwrench 350, but use a different cam. I believe I can build it for about $ 1400. What type of pistons do I need to order to do this and what other heads are good for decent mpg besides the 882, not wanting to go to the vortec setup. Wanting low rpm torque and decent milage so I can drive it to work sometimes. Anyone have suggestions? Thanks.

68NovaSS 01-17-2011 11:54 AM

Try the search function for 350 builds, this had been hashed over a million times, there's alot there.

All times are GMT -6. The time now is 10:46 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999 - 2012. All Rights Reserved.