|
|
|
02-23-2006, 08:16 PM
|
|||||
|
|||||
|
350 chev heads
I have a set of #3998920 heads 1.94/1.5 valves 76cc.They were on a 4bolt with a medium cam.Some pistons have scuffing on the sides so I believe I should change them but to what.I want about 10-1.This engine is not my final but I want to fix it right so I can sell it honestly.I would do a valve job to be on the safe side.Any suggestions.
also are these heads #3998920 any good Last edited by rusty9663; 02-24-2006 at 02:35 AM. 
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 350 heads | derek32303 | Engine | 9 | 01-31-2006 12:47 AM |
| Will 305 Heads Work On A 350 Or 400 Sbc ?? | STATUTORY GRAPE | Engine | 3 | 04-24-2005 08:10 PM |
| 350 Block - Heads - Crank Combo | nightrain_rod | Engine | 0 | 07-06-2003 10:50 PM |
| 350 heads | Rodrunner | Engine | 1 | 02-08-2003 04:02 PM |
| How common are 2.02 valve 350 heads??? That aren't crack prone | stonedchihuahua | Engine | 10 | 01-30-2003 04:01 PM |
