Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - 350 sbc question
View Single Post
  #1 (permalink)  
Old 11-26-2002, 02:09 PM
stfinney's Avatar
stfinney stfinney is offline
Member
 
Last photo:
Join Date: Oct 2002
Location: Vero Beach, FL
Age: 41
Posts: 387
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Post 350 sbc question

I have a 350 sbc with a Weiand Action-Plus Aluminum Intake, 1 inch spacer plate, 487X heads with 1.94/1.50 valves, Z28 .500 lift springs and a 278 duration cam with 222 @ 50 and a lift of .467. What would be a good torque converter stall and rear end gears to get the most out of this setup? I use this mainly for street purposes in a 72 fullsize truck weighing about 3500-4000lbs with driver. Some towing occasionally.
Reply With Quote