Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - 350 turbo tranny / first gear
View Single Post
  #4 (permalink)  
Old 10-12-2007, 08:42 AM
badriand's Avatar
badriand badriand is offline
Member
 
Last photo:
Join Date: Nov 2002
Location: texas
Posts: 171
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Quote:
drop the pan . look at the linkage. I've seen the spring arm that rides on the rooster comb of the shift linkage bent in such a way that it moves the shift linkage into the wrong position

Yikes, i replaced the pan gasket about 4 months ago. Basically i have been building on this truck and it doesn't go anywhere i have drove it around my block twice in the past 4-5 months (no doors, no hood, no windows etc) sitting on a stool. Basically it was working fine and i haven't done any channel to the frame , i did however drop the vehicle but that was the actual height of the truck the position of the shift linkage was left untouched. Could someting happen internally to the tranny when it is barly driven. Thanks guys for your help.
Reply With Quote