Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - 355 SBC, would like Hp and TQ estimations.
View Single Post
  #15 (permalink)  
Old 01-27-2013, 09:45 PM
bygddy bygddy is offline
Last photo:
Join Date: Mar 2008
Location: Ottawa
Posts: 2,194
Wiki Edits: 0

Thanks: 131
Thanked 373 Times in 315 Posts
0.025 in the hole, flat tops 4vr we will say 7cc, 0.015 felpro head gasket, PN#1094, your 63cc heads (check and be sure, because they won't actually be 63) but assuming......this gives you 10.3:1 and 0.040 quench.....
You mentioned 0.016 in the hole at the top, then I believe said 0.025 further down? If the block hasn't been decked this is more likely...

Last edited by bygddy; 01-27-2013 at 10:03 PM.
Reply With Quote