|
|
|
06-03-2003, 10:44 PM
|
||||||
|
||||||
355 update and timing question.
I got the engine back in my camaro ( third times a charm droped right in this time) Started the break in and it runs pretty good . I need to figure out how much timing I should run I have it at about 6 right now, dont know the total Im just going by the balancer reading. I have a comp cams extreme energy 268h cam and about 9.5 to 1 comp speed pro forged pistons(9.7:1 but with my heads 9.5). my heads are world products s/r torquers 2.02 1.6. hyd lifters and roller rockers. what timing range would you guys recomend? any other info needed? if so just ask thanks for your time.
|
|
06-04-2003, 12:39 AM
|
|||||
|
|||||
|
a good start is 10-12 degrees initial timing
|
|
06-04-2003, 01:54 AM
|
||||||
|
||||||
|
[quote]Originally posted by andybird:
<strong>a good start is 10-12 degrees initial timing</strong><hr></blockquote> Be sure to disconnect the vacuum hose to the distributor and plug it when setting the timing. Re-connect the hose AFTER the timing has been set.
|
|
06-04-2003, 02:40 AM
|
|||||
|
|||||
|
yeah, sorry, I assumed everyone knew that
|
|
06-04-2003, 04:26 AM
|
||||||
|
||||||
|
Just move the Timeing ahead a few degrees at a time untill eng. kickes back while cranking. Or starts pinging. Then back up untill that stops. Good Luck
Troy; <img src="confused.gif" border="0">
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
