377 sbc in a truck
well its about time to start bying stuff for this engine, so i thought i would repost...
i just rebuilt my trannssmission and its pretty sweet,
ill refresh you guys with my set up...
1990 chevy silverado
400 sbc destroked to a 380
its got a 0.40 bore
aluminum brodix heads
gear drive set
stock cam- stock intake-stock rear end gears,stock quadjet
what i need to know is the right set up for my stock stuff.
im thinking a 2500-3000 stall.
4.11 gears or 3.73...leaning towards 4.11
and edelbrock air gap intake
and a holley 750
the cam thing is one of the main things i need help with, i dont really get the lobe sizes and stuff.
i had theses iszes sugjested before
around 220-230 duration at .050
Comp Cams xtreme energy 288 HDY roller, 288/294 @.050 236/242 .520/.540 110
cam in the 240's int. 250'exh @.050 .550 lift range and a 106 or 108 Ls angle
also would like to know a good tire size..