Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - 383 stroker kit (Ebay)
View Single Post
  #5 (permalink)  
Old 04-20-2005, 05:15 PM
Hazard Hazard is offline
New Member
 
Join Date: Mar 2005
Location: Houston
Posts: 21
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Well, I'm planning to use an XE274H-10 cam from Comp cams 230/236 duration. As for compression, I'm trying to keep it around 9.5, so I'm going with dished pistons due to the vortec 64cc heads that I'm going to use, Edelbrock Performer RPM intake, 750cfm holley, 1.6:1 roller rockers, springs specified for cam. I'm starting from scratch here, so all parts going to be used are going to be new. It's going to take a while to finish this project, but I'm trying to get into the low to mid 400hp range. Any recommendations on this setup? I'm still undecided about the cam, but that's the setup I'm starting off with.

Let me check out Racers Outlet on ebay and see what I can find.

Thanks,
Martinez
Reply With Quote