Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - 383 stroker questions
View Single Post
  #1 (permalink)  
Old 08-05-2012, 12:53 PM
7178Chevyman 7178Chevyman is offline
Registered User
Join Date: Oct 2011
Location: Mulkeytown, IL
Posts: 27
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
383 stroker questions

I am looking to build a nice 383 for strip use only, but am still on a budget, first off I have read other posts and do not find answers I'm looking for. I would like to know if the 6" rod is better for my strip application, and I'm also looking to run an 11 to 1 Cr with a 64cc head. Will I be able to run this on a mix of 93 and 110 octane, or should I be better off with 10:7.1 cr due to fuel detonation issues, since I'm on a budget I don't need any catastrophic failure. The pistons either way will be forged. Thank you for all your help any info or opinions are appreciated.
Reply With Quote