Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - 4 of 8 cylinders working on sbc350
View Single Post
  #1 (permalink)  
Old 12-31-2012, 07:56 PM
Phat Juan's Avatar
Phat Juan Phat Juan is offline
Registered User
Last photo:
Join Date: Sep 2010
Location: Lynwood, Ca
Posts: 23
Wiki Edits: 0

Thanks: 5
Thanked 0 Times in 0 Posts
4 of 8 cylinders working on sbc350

On Friday my car was running fine. So sat morning I go to start it and it would not stay on and throw smoke I checked my spark plugs and they where black(smelled like gas) so I figured it was running to rich so I took the CARB to get rebuilt. The car was shaking after the rebuilt so I changed the spark plugs on it and the shaking stopeed but now 4 of my 8 cylinders are not working (2 on each side). This I noticed by pulling the wire from the distributor and the cars idle wont change on 4 and on the working ones u can notice the difference in the idle. What can this be. I have a sbc350 with edelbrock intake, 4 barrel holley carb, street fire distributor, street fire wires. PLEASE HELP I'M LOST I NEVER DELT WITH THIS PROBLEM AND NEVER HEARD OF ANYONE TALKING ABOUT THIS ISSUE!!!THANK YOU IN ADVANCE!
Reply With Quote