Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - 4"x2"x3/16" tube frame
View Single Post
  #6 (permalink)  
Old 01-06-2013, 01:07 PM
DeeW DeeW is offline
Registered User
 
Join Date: Oct 2007
Location: Wolfe Island, Canada
Posts: 29
Wiki Edits: 0

Thanks: 26
Thanked 4 Times in 3 Posts
4"x2"x3/16"

I think 3/16" is a good choice. Remember, pot holes,road kill, etc. Also the Plans I bought on EBay from Hughs Rat Shack in NM are no better than the freebie Youngsters Plans and were incomplete along with a non existent web site.........hmmm....... anyways, 20" is the standard front inside rail measurements for a 350 set up that I have concluded from various sites. Having never constructed a frame before, does this sound right. I am running a 4" drop straight Speedway front end with spring over, reverse eye on a front perch.

Last edited by DeeW; 01-06-2013 at 01:13 PM. Reason: Thread has already been addressed
Reply With Quote