Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - 406 help
Thread: 406 help
View Single Post
  #10 (permalink)  
Old 03-21-2014, 08:34 PM
bygddy bygddy is offline
Proud LOSER
 
Last photo:
Join Date: Mar 2008
Location: Ottawa
Posts: 2,072
Wiki Edits: 0

Thanks: 82
Thanked 316 Times in 273 Posts
If its me, I would look at an even smaller head, the Dart SHP 180's
http://www.summitracing.com/int/part...make/chevrolet
Use a 0.025 HG
If you can swing a retrofit roller then I would look at this
http://www.summitracing.com/int/part...make/chevrolet
If not, then something around this
http://www.summitracing.com/int/part...make/chevrolet
Top with 1 5/8 longtubes
A regular performer intake with a 4 hole spacer.
I suspect something like this would make brutal low end.
Reply With Quote