|
|
|
01-28-2010, 06:11 PM
|
||||
|
||||
|
41 kb-1 front brake conversion to disc.
Hi All, I am posting for a friend that is stuck with his front brake conversion on his 41 kb-1 International. The conversion show by wildmanbill will not work for him because he needs to use the stock steering arm and tierod configuration. when he uses wildmanbill's caliper mounting bracket the caliper hits the tierod arm. He also tried mounting them on the front but when installing the caliper it hits the rotor. Does anyone know of a conversion that mounts the caliper in the front or the back, but allows for the stock steering components.
|
|
02-24-2010, 05:38 PM
|
||||
|
||||
|
try rustyhope disc kit
rustyhope.com makes kits for old MOPAR that may work with the IH. I think he likes the challenge of "off brands". Costs nothing to ask.
I used his kit on my 55 Dodge PU with good results and lots of support from Charlie Aikers (aka rustyhope).
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Disk Brake Conversion for 1947 Dodge 1/2 ton pickup front axle | leonard egan | Suspension - Brakes - Steering | 4 | 01-21-2011 06:17 PM |
| Rear Disc Brake Conversion - two trucks 79 & 96 | Torque454 | Suspension - Brakes - Steering | 4 | 01-13-2010 12:02 PM |
| Heidt or SSBC Disc Brake Conversion Kits? | twborbely | Suspension - Brakes - Steering | 5 | 06-27-2007 01:12 PM |
| disc brake conversion | kaptmikey | Suspension - Brakes - Steering | 5 | 05-30-2007 10:53 AM |
| `33 Ford disc brake conversion | Mike Humphrey | Suspension - Brakes - Steering | 0 | 02-17-2002 02:49 PM |
