Hot Rod Forum : Hotrodders Bulletin Board

Hot Rod Forum : Hotrodders Bulletin Board (http://www.hotrodders.com/forum/)
-   Engine (http://www.hotrodders.com/forum/engine/)
-   -   454 Oval Port Heads (http://www.hotrodders.com/forum/454-oval-port-heads-227917.html)

NOVA1958 01-03-2013 05:36 PM

454 Oval Port Heads
 
Hey guys just wondering what a set of 454 oval port open chamber 113cc (353049) heads are worth.The heads have been milled and bowl blended and the valve are 2.25 intake and 1.88 exhaust also comes with valve springs.

Thanks

vinniekq2 01-03-2013 06:41 PM

not much as so many people want Al.
If you own them,then use them.

hcompton 01-03-2013 07:11 PM

Quote:

Originally Posted by NOVA1958 (Post 1630257)
Hey guys just wondering what a set of 454 oval port open chamber 113cc (353049) heads are worth.The heads have been milled and bowl blended and the valve are 2.25 intake and 1.88 exhaust also comes with valve springs.

Thanks

Your saying the heads are free and ready to go? If so run them. But know what they are capable off in case you really want to take full advantage of your engine.

What is the goal for total output, car type, weight and is it street or race.

techinspector1 01-03-2013 07:28 PM

Quote:

Originally Posted by NOVA1958 (Post 1630257)
Hey guys just wondering what a set of 454 oval port open chamber 113cc (353049) heads are worth.The heads have been milled and bowl blended and the valve are 2.25 intake and 1.88 exhaust also comes with valve springs.
Thanks

Good heads. I would cc the chambers myself before I began doing the math to put a combination together. As far as the price, they're worth whatever someone will pay for them. I'd offer 300 bucks for the pair just to get negotiations started.

BOBCRMAN@aol.com 01-03-2013 08:29 PM

I doubt the 113 cc. chamber. I sell a few of these every year. Most come out about 117 after a modest mill cut.

I sold a pair last week, almost the same, but with 2.19" intakes. Set up for a .620" hyd roller cam, for $550.00 exchange. That was less $$ than the other local shops. But, the customer bought a 496 short block from me earlier in the year..


All times are GMT -6. The time now is 04:21 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.