Hot Rod Forum banner

46 ford coupe

2K views 2 replies 2 participants last post by  rbtr8tr 
#1 ·
Gentlemen and ladies I have 3 question s...I have searched many catelogs for front disc brake conversion for a 1956 ford .. but unable to find the product ..I have a 1946 ford coupe sitting on a '56 ford frame .. I also want to know if a 350 engine and a power glide transmissin will fit the coupe..and next where can i find the right radiator for the coupe ..please bare with me this is my first try at building a car .. thanks in advance for any help you may give me on this .
 
#2 ·
As a Moderator here ... and a old Ford owner ... I want to :welcome: WELCOME YOU ... :welcome:

You have a quite usual car combination ...
I suggest you investigate the Ford Granda spindle swap ... for the 56 Ford front suspension. It is fairly common ... for the Ford guys ...

Reworked Granda spindles here
http://www.fatmanfab.com/06page17.htm

Depending on where the body is mounted ... a 350 and a Glide should go ... but will take fabricated engine and transmission mounts.

Walker Radiator ( Memphis TN ) is now making radiators for the 50's Fords ...

Again WELCOME

Deuce ...
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top