Hot Rod Forum : Hotrodders Bulletin Board

Hot Rod Forum : Hotrodders Bulletin Board (http://www.hotrodders.com/forum/)
-   Engine (http://www.hotrodders.com/forum/engine/)
-   -   48 gmc truck to s10 frame swap (http://www.hotrodders.com/forum/48-gmc-truck-s10-frame-swap-111984.html)

pioneer-auto 03-22-2007 02:41 PM

48 gmc truck to s10 frame swap
 
I am putting a 1972 Chevy 350 and a 700r4 onto an S10 frame with my 48 GMC truck on it, according to the info I've read , you need to move the motor back tward the firewall about 3 inches, I have offset motor mounts used for the s10/350 swap

http://www.jagsthatrun.com/Pages/Chevrolet_S-10_V-8.htm

but that is to move it forward 3-4", when I try to swap them around to go the other direction the mounts hit the fuel pump and the power steering pump


any Ideas??

hippy420 06-03-2009 08:09 PM

305 s10 frame
 
I put a 350 in a 95 s10 with motor mount kit.I ran an electric fuel pump and a pwr steering pump with a remote fluid canister on the driver side.


All times are GMT -6. The time now is 07:28 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.