Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - 4L60E 3-4 clutch pack clearance question
View Single Post
  #4 (permalink)  
Old 01-09-2013, 09:15 AM
Peepaw Peepaw is offline
Registered User
 
Join Date: Apr 2012
Posts: 39
Wiki Edits: 0

Thanks: 1
Thanked 0 Times in 0 Posts
Hey guys, while we are here, I guess I do have another question. I have just recently started getting into rebuilding auto's (I specialize in manual trans rebuilds/performance upgrades to trans like the T56, TKO 500/600's, etc..).

This 4L60E didn't want to go into 3rd gear, and when it did it would slip real bad. Clutches on the 3/4 clutch pack were worn out.

Anything in particular that would've caused that? Any known problems with that 3/4 clutch pack? I upgraded with the Alto red's, changed out the spring in oil pump (bought the shift improvement kit for oil pump/valvebody), , springs in accumulator, etc...

Anything I should be looking for before I get trans ALL the way back together and in car? Thanks again guys
Reply With Quote