How can we definitively know how to correctly install the sprag in a 4l60e. Replacing a crunched one and have seen many issues with them being reversed. Any good tips? I have rebuilt a few but always put them back in the way they come out. This one was destroyed.:mad:
03-19-2013 12:21 AM
Hold the forward clutch hub [larger splined hub] stationary in your left hand,and with your right hand,grab the overrun hub[smaller splined hub] and turn it. It freewheels clockwise [turning it away from you],and locks counter-clockwise[turning it towards you]. Hope this helps.