![]() |
|
|
|
||||
|
5.7 350 engine
hello everyone im not to good on engines so can you guys plz help me on getting my engine up to 400 hp i wanna have the fastest 87 iroc on the street i currently have a stock engine
|
|
||||||
|
Which street?
|
|
||||
|
350
Nice 67 Camaro My Budget Is Like 3 G Im Hoping To Get The Most H.p With That Amount
|
|
||||||
|
Quote:
|
|
|||||
|
Fastest , like 10'seconds.
4.88 gears 3000max weight 11:1 245/245 .557/.557 lift cam mechanical Single plane or tunnel ram 2 x750's lightweight everythng tuff parts Perfect stall 28" slicks That sounds about right for 10.5's if you want faster the car should be closer to 2100lbs weight. |
|
||||||
|
Hey mijaries,
If you are new to engines like any newbie, you wana read up on some good books such as the ones listed in this wiki: "Chevrolet Engine Rebuild Guide Books and DVDs". These recommended regularly by the more experienced members on this forum. Once you've read some of these, you'll have a better idea of how an engine works, what kind of a set up you should be looking at for a street car, and that it takes more than just the engine to put the power to the ground. Once you have a better idea, you'll have lots more questions to ask. Good luck! |
|
||||||
|
Excellent advice, LT1. And to the OP- don't get carried away w/compression. Even w/a big-A cam, this is race gas territory and we ain't talking peanuts when it comes to cost if this is a street machine. That's roughly 94¢ per mile @ $7.50/gallon and 8 MPG.
|
|
||||||
|
I'm wondering why you abandoned the other thread you started on this? You need to answer the questions asked there- if you are serious about this.
|
|
|
| Recent Hotrodding Basics posts with photos |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 350 Crate Engine: Loud humming sound after engine warms up | sofa1515 | Engine | 2 | 01-11-2010 06:48 PM |
| Engine Help. Engine Turns over Hard, like siezed yet runs awsome. | Merle9069 | Engine | 3 | 10-05-2008 06:38 PM |
| I need engine mount bracket ideas 1930 chevy with 302 boss engine. | Riley | Engine | 3 | 07-25-2008 07:29 AM |
| Ford 302 engine to engine stand bolt size? | Lee in Texas | Engine | 4 | 03-24-2008 10:30 AM |
| say you have a THOUSAND horsepower engine..... (technical engine question inside) | lowROLLERchevy | Engine | 14 | 02-24-2007 08:26 AM |