55 Gmc dash to 55 chevy dash
 

How hard is it to change a 55 GMC dash to a 55 Chevy p/u dash is it even possible without tearing the dashes up? any help or suggestions would be greatly appreciated.Thanks,Stubby

There is only one way. You have to replace the entire dash, not just the gauge cluster. Take out the windshield and use a die grinder on both trucks. Then tack the one you want back in place. Unless you are a god with bondo or lead, trust me, it's the only way.
Been there, done that, ripped up a good t-shirt

[ November 18, 2002: Message edited by: Madd Syntst ]</p>

hey stubby, i'd be interested in thet gmc dash if you do the dead...and i'm just down the road from ya..

Thanks for the help, thats how we'll do it.
Tom if we get the GMC dash out without destroying it i'll let you know.
Stubby

If its first series 55 they have the same dash....