|
|
|
03-17-2006, 09:54 PM
|
||||
|
||||
|
59-64 Olds 394
hey I'm new to the site and I've got a 59 olds 394 high performance with the J heads and flat top pistons, I measured it out and the bore is 30 over, the crank is 10 but #3 rod journal is bad so there going 30 I was told by the machine shop that was the max allowed but I have to do it. The cam is badly pitted and needs replacing anywase, I was looking for some suggestions on what combos will work without blowing it up as I have to bore the cylinders at least 40.
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| SBC 350 superiority rebuttle...was:POWERED BY CHEVY, WRITTEN ON A FORD, (from 'Engine | Oldsmolac911 | Hotrodders' Lounge | 50 | 01-12-2011 10:00 PM |
| 59 olds super 88 and disk brake conversion | atomicpapa | Suspension - Brakes - Steering | 2 | 02-20-2006 11:41 PM |
| 440 Manifolds Vs 394 Olds | VA46CLANSMEN | Engine | 2 | 10-28-2005 06:12 PM |
| 394 Olds Rocket | VA46CLANSMEN | Engine | 1 | 10-26-2005 02:10 PM |
| 64 olds colour | dh79 | Interior | 0 | 01-29-2003 08:07 PM |
