Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - 66 ford truck twin i beam lowering tech
View Single Post
  #2 (permalink)  
Old 04-15-2002, 11:48 AM
Phat's Avatar
Phat Phat is offline
Toy builder
 
Last photo:
Join Date: Sep 2001
Location: COLD NORTHEAST
Posts: 223
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Post

No cheap way to lower the twin i-beam. It requires tons of knowledge and cutting. Heck ford never has gotten it right to this day. You can buy cut beams ...but i have yet to see a real good set i would recomend. But one thing is for sure if you lower it just a tiny bit it will kill the inside edge of the tires and drive like crap. We have had to bend those beams for years just to get them right in stock trucks. Sorry for the bad news.It CAN be done ...but it costs big bucks and is not for the first timer. These guys do some lowered beams but i dont like the quality..AIM 1-800-872-7937. I dont rccomend them ..but this is there #

[ April 15, 2002: Message edited by: Phat ]</p>
Reply With Quote