[chrisf67]

I recently put a 700r4 into my 67 chevy pickup. I replaced the manual tranny which was a granny gear tranny. Can anyone tell me exactly what the tranny is (saginaw, muncie, etc.) and if it is likely I'll find anyone interested in buying it?

[M&M CUSTOM]

If it was a granny tranny it is either of these three.
SM420 7.02,3.57,1.70,1.00 PTO cover on driver side only. Offered from 1947-1967.
NP435 6.68,?.??,?.??,1.00 Offered from 1963-1972
SM465 6.55,3.58,1.57,1.00 PTO cover on both sides.
Offered from 1968-1991
The "SM"'s are Muncie transmissions and "NP" is New Process Gear.
There should be an identification tag on the upper rear of the driver side of the case.
The casting numbers varied from year to year and were at times mostly confusing and meant only minor changes.

[ April 28, 2003: Message edited by: M&M CUSTOM ]</p>

[mustang66maniac]

67 chevy granny gear tranny

hmm....try sayin that 6 times fast <img src="graemlins/mwink.gif" border="0" alt="[mwink]" />