Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - 68 chrysler upper ball joints
View Single Post
  #1 (permalink)  
Old 09-18-2011, 02:36 PM
chevelle_502's Avatar
chevelle_502 chevelle_502 is offline
Get out the ducktape...
Last wiki edit: How to rebuild an engine
Last journal entry: Front brakes
Last photo:
Join Date: Jun 2004
Location: Georgia
Age: 30
Posts: 213
Wiki Edits: 5

Thanks: 0
Thanked 0 Times in 0 Posts
68 chrysler upper ball joints

Ok ive scoured the internet and searched everything I could on here concerning my 68 chrysler's upper ball joints. From what Ive learned I need a square socket and depending on the condition I can thread the old ones out and the new ones back in provided the bore is in goog enough condition and the new ones tighten to 125 ft-lbs. What I want to make sure of is from what I can tell I need a 1 7/8 socket, but theres a lot of different sizes out there. Also any tips or tricks would be great.
Reply With Quote