Hot Rod Forum banner

69 ford f100---pictures

975 views 3 replies 3 participants last post by  fy54957 
#1 ·
want to build a engine 428 with a lot Torque not hp-what do I need----going in a 69 f100 truck
 

Attachments

See less See more
2
#2 ·
Look at Fordfe.com and fepower.net for the BEST info on the Ford FE engine. The hard part about building a 428 is the engine blocks are hard to find. You can build a stroker motor out of the much more common 360/390 blocks and get a 445 cid motor. Vendors that are on those sites have all the specifics.
 
#4 ·
I know where I can get a 428 from a friend of mine,all machine work has been done,block bore .030,crank .010----head work been done-its all new but it all got to be put together---Just wanted to see what more I can get out of it before putting it together.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top