|
|
|
10-15-2002, 07:02 PM
|
|||||
|
|||||
7.5 gear change
my 78 buick gears are gone, driveshaft just spins. ive changed a chevy ring gear before but never a pinion.i have some gears from an S-10 I would like to swap out, wondering how much more dificult it would be changing ring n pinion. yeah the swap would be 2.41 to about 3.40-3.73 not sure.any help appreaciated.
|
|
10-15-2002, 07:16 PM
|
||||||
|
||||||
|
not the same rearend, not a compatible swap, check your spider gear shaft they had a bad wear and breakage problem.
|
|
10-15-2002, 07:21 PM
|
|||||
|
|||||
|
there both 7.5 inch 10 bolt rear ends
|
|
10-16-2002, 03:43 PM
|
||||||
|
||||||
|
YES they are both 7.5 rears but gm. did a redesign in 88 that changed the size and number of axle splines and side gears , axles are not interchangable
|
|
10-17-2002, 05:54 PM
|
|||||
|
|||||
|
I think it came out of an 86, not sure. any sugestions on how to tell. Thanks
|
|
10-17-2002, 05:57 PM
|
||||||
|
||||||
|
the only way to tell is to pull the rear cover compare the two, if they are the same you are in luck.
|
|
10-17-2002, 06:00 PM
|
|||||
|
|||||
|
will do, thanks for your help.
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
