700R INTO AN 84 C-10
 

I'M TRYING TO PUT A 700R4 (W/ DEEP TRANS PAN) INTO MY 84 C-10. DOES ANYONE KNOW IF I NEED A DIFFERENT TRANS CROSSMEMBER? I'VE TRIED EVERYTHING ALREADY. I CAN'T GET THE DAMN THING TO GO IN CORRECTLY. I EVEN GRINDED SOME OF THE LIP OFF OF THE CROSSMEMBER, BUT IT STILL HITS THE PAN AND WON'T LINE UP!! I'M ALMOST READY TO GIVE UP AND GO BACK TO THE TURBO350. ANY ADAPTERS, DO I NEED DIFFERENT MOTOR MOUNTS, DIFFERENT DRIVE SHAFT??? I'M BACKED IN A CORNER HERE, PLEASE TELL ME ONE OF YOU CAN HELP ME OUT?? :mad: <img src="graemlins/evil.gif" border="0" alt="[evil]" /> <img src="graemlins/boxing.gif" border="0" alt="[boxing]" />

[ November 22, 2002: Message edited by: RAYSABOY808 ]

[ November 22, 2002: Message edited by: RAYSABOY808 ]</p>

you probably have the wrong tailshaft housing, try one from an M van(you will have to make the mount but it has holes for mount bracket) or corvette.

HOW WILL THAT HELP CLEAR THE TRANS PAN?