Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - 700R4 Clutch Pack Air Check
View Single Post
  #2 (permalink)  
Old 04-18-2008, 08:35 PM
Crosley's Avatar
Crosley Crosley is offline
Hotrodders.com Moderator
 
Last wiki edit: T-350 rebuild tech
Last journal entry: Bar under the dash
Last photo:
Join Date: Nov 2002
Location: ... USA
Posts: 8,064
Wiki Edits: 1659

Thanks: 317
Thanked 97 Times in 94 Posts
Quote:
Originally Posted by mican99
Rebuilding a 1991 700r4, (first time) I have assembled the input drum and did a 40 psi air test per the video, the 3-4 pack and the forward clutch appear to have no air loss, for the overrun seems to have a slight leak down, I can hear the piston engage and disengage. But I can hear a slight hissing. I have disassembled it and checked the seals a couple times. I canít seem to find any post pertaining to this.
Any suggestions/comments would be greatly appreciated, I have read the majority of post on this forum and believe I have learned a great deal from it.
Mike

normal air check of the o-r clutches.

You want the o-r clutches to come off and the forwards remain applied as you air check.

__________________
Some people are like Slinkies... Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs.
Reply With Quote