? for 71-c10 axel stud help or anybody

66chevytruck · #1 (**permalink**) 06-25-2009, 02:29 AM

I am rebuilding my 12 bolt in my 66.Have moser axles 5 by 5.What size wheel stud did you use as far as knurl.Factory or aftermarket.

fast68 · #2 (**permalink**) 06-25-2009, 01:23 PM

factory 1/2" studs should work fine

NAPA has them

and others too

66chevytruck · #3 (**permalink**) 06-25-2009, 01:44 PM

I was wanting to use arp or aftermerket.But the knurl size it different on them.The ones from napa list a .535 size knurl.The others are .560 higher knurl size on the aftermarket.

C-10 · #4 (**permalink**) 06-25-2009, 08:23 PM

Drill the axles?

cobalt327 · #5 (**permalink**) 06-26-2009, 08:58 AM

Quote:

Originally Posted by 66chevytruck

I was wanting to use arp or aftermerket.But the knurl size it different on them.The ones from napa list a .535 size knurl.The others are .560 higher knurl size on the aftermarket.

I will suggest you take the axles to a competent shop to have the holes enlarged. Just using a hand-held drill and using the existing holes will not provide a consistent center to center between holes.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
'40 Ford front axel on a T-bucket	Nightfire	Suspension - Brakes - Steering	13	07-01-2005 10:46 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)